???? >>?????? ????? ???? ????? >>????? Alloy Cube for Clock

What Is ????? Alloy Vibrator for Clock/ Mobile Phone?

When clock vibrates, there is an eccentric motion, which is caused by eccentric motor with vibrating components occurs. As the center of the gravity is eccentric, and is not in the rotor of motor, then the clock vibrates. In this case, machinery component with good properties of wear resistant and high specific gravity is required. ????? alloy cube is the best material to make ????? alloy vibrator used in clock/watch.We can provide all kinds of ????? alloy cube as your requirements, ????? alloy cube is one of our leading products.

????? alloy vibrator-01	????? alloy vibrator-02	????? alloy vibrator-03	????? alloy discs-04

Application for ????? Alloy Cube in Vibrator

????? alloy cube is excellent material for making ????? alloy vibrator. Since the density of ????? alloy cube is so high and the maximum density should be 18.6g/cm3. ????? alloy cube is popular where small component with relatively large mass is needed, for example: the ????? alloy vibrator used in clock/watch, etc.
????? alloy vibrators in clock/watch are one of our leading products. Compared with other materials, ????? alloy has the advantages of accurate weight, and non-magnetism. In particular, since a motorized weight usually produces the ????? alloy vibrators, lighter-weight phones may have weaker vibrating mechanisms.
Various types of ????? alloy vibrators used in clock/watch or bobs are available. Please contact our sales team at sales@chinatungsten.com sales@xiamentungsten.com for ??? details.

The Following Are the Pictures of ????? Alloy Vibrators in Clock/Watch:

?????? R2.5×3mm A 150°	????????? R2.7×3mm B	???????????? R2×4mm A	?????????? R2.7×3mm A

?? R(4.64-3.25)×1.25mm	?? ?? R4×2.1×8mm	?????????? R4.5×1.35mm	????????? R2.05×3.05mm

Therefore, if you are interested in ????? alloy vibrator, please feel free to contact sales@chinatungsten.com sales@xiamentungsten.com, or call:00 86 592 512 9696.